Subaru S209 2019, Руководство по обслуживанию

Страница: 143 / 297

RS-15
Front Lateral Link
REAR SUSPENSION
• Check the pillow ball bushing for looseness.
• Visually check the boot on the ball joint for abnormal cracks, fatigue or damage.
2) Install the lateral link assembly - front.
CAUTION:
• When installing the lateral link assembly - front, install the washer A on the nut side of the pillow
ball bushing.
• When installing the adjusting bolt (a), make sure to fix the bolt head in place and tighten the nut
side (b).
• Align alignment marks (c) on the adjusting bolt for lateral link assembly - front and on the rear sub
frame assembly.
Tightening torque:
T1: 60 N·m (6.1 kgf-m, 44.3 ft-lb)
T2: 100 N·m (10.2 kgf-m, 73.8 ft-lb)
3) Install the nuts, and install the cable assembly - parking brake.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
4) Install the trailing link.
Tightening torque:
110 N·m (11.2 kgf-m, 81.1 ft-lb)
5) Install the rear wheels and lower the vehicle.
Tightening torque:
120 N·m (12.2 kgf-m, 88.5 ft-lb)
6) Inspect the wheel alignment and adjust if necessary.
CAUTION:
When the wheel alignment has been adjusted, perform adjustment of the VDC sensor midpoint set-
ting mode.
7) Perform reinitialization of the auto headlight beam leveler system.
AA-13028
(b)
(a)
(c)
(a)
T2
T1