Subaru LEGACY, Руководство пользователя

Страница: 277 / 454

Black plate (284,1)
北 米
Model "A2470BE-A" EDITED: 2010/ 3/ 24
7-20
Starting and operating
transmission is neutral; the vehicle will roll
freely, even on the slightest incline unless
the parking brake or foot brake is applied.
Avoid coasting with the transmission
neutral.
During coasting, there is no engine brak-
ing effect.
NOTE
.
To protect the engine while the
“
N
”
position is selected, the engine is
controlled such that the engine speed
may not become too high even if the
accelerator pedal is depressed hard.
.
If the select lever is in the
“
N
”
position when you stop the engine for
parking, you may not subsequently be
able to move it to the
“
R
”
and
“
P
”
positions. If this happens, turn the
ignition switch to the
“
ON
”
position.
You will then be able to move the select
lever to the
“
P
”
position.
WARNING
Do not drive the vehicle with the
select lever in the
“
N
”
(neutral)
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
!
D (Drive)
This position is for normal driving. The
transmission automatically shifts into a
suitable gear according to the vehicle
speed and the acceleration you require.
When more acceleration is required in this
position, depress the accelerator pedal
fully to the floor and hold that position. The
transmission will automatically downshift.
When you release the pedal, the transmis-
sion will return to the original gear posi-
tion.
To use the manual mode, move the lever
from this position into the manual gate.
NOTE (AT models only)
Automatic downshifts to 4th or 3rd may
occur even when driving on a level
road depending on conditions, such as
how hard you depress the brake pedal.
!
While climbing a grade
When driving up a hill, undesired upshift is
prevented from taking place when the
accelerator is released. This minimizes
the chance of subsequent downshifting to
a lower gear when accelerating again.
This prevents repeated upshifting and
downshifting resulting in a smoother op-
eration of the vehicle.
NOTE
The transmission may downshift, de-
pending on the way the accelerator
pedal is depressed to accelerate the
vehicle again.
&
Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
.
The select lever cannot be operated
unless the ignition switch is turned to the
“
ON
”
position and the brake pedal is
depressed.
.
The select lever cannot be moved from
the
“
P
”
position to any other position
before the brake pedal is depressed.
Depress the brake pedal first, and then
operate the select lever.
.
Only the
“
P
”
position allows you to turn
the key from the
“
Acc
”
position to the
“
LOCK
”
position and remove the key from
the ignition key cylinder.
.
If the ignition switch is turned to the
“
LOCK
”
position while the select lever is in
the
“
N
”
position, the select lever may not
be moved to the
“
P
”
position after a period
of time. Therefore, move the select lever
to the
“
P
”
position with the brake pedal
depressed soon after the ignition switch is
turned to the
“
LOCK
”
position.