Subaru LEGACY, Руководство пользователя

Страница: 185 / 454

Black plate (190,1)
北 米
Model "A2470BE-A" EDITED: 2010/ 3/ 24
4-12
Climate control
!
A/C
–
Air conditioner button
If the windshield starts to fog when the
climate control system is operated in the
AUTO mode, press the air conditioner
button
“
A/C
”
to defog and dehumidify.
When this button is pressed, the air
conditioner compressor turns on and the
indicator light
“
A/C
”
on the display illumi-
nates. To turn off the air conditioner
compressor, press the
“
A/C
”
button again.
NOTE
The air conditioner compressor does
not operate when the outside air tem-
perature is below 32
8
F (0
8
C).
!
Airflow mode selection button
Select the desired airflow mode by press-
ing the airflow mode selection button. The
selected airflow mode is shown on the
display.
There are four airflow modes that activate
the following air outlets.
(Ventilation): Instrument panel outlets
(Bi-level): Instrument panel outlets and
foot outlets
(Heat): Foot outlets, both side outlets of
the instrument panel and some through
windshield defroster outlets
(Heat-def): Windshield defroster out-
lets, foot outlets and both side outlets of
the instrument panel
NOTE
When the
“ ”
mode is selected, the air
conditioner compressor automatically
operates to quickly defog the wind-
shield and the air inlet selection is
automatically set to the
“
outside air
”
mode.
!
Air inlet selection button
Select airflow by pressing the air inlet
selection button
“ ”
.
ON position (recirculation): Interior air is
recirculated inside the vehicle. Press the
air inlet selection button to the ON position
for fast cooling with the air conditioner or
when driving on a dusty road. The
indicator light will illuminate.
OFF position (outside Air): Outside air is
drawn into the passenger compartment.