Subaru LEGACY, Руководство пользователя

Страница: 276 / 454

Black plate (283,1)
北 米
Model "A2470BE-A" EDITED: 2010/ 3/ 24
mal timing after the engine has warmed
up.
.
Immediately after transmission fluid
is replaced, you may feel that the
transmission operation is somewhat
unusual. This results from invalidation
of data which the on-board computer
has collected and stored in memory to
allow the transmission to shift at the
most appropriate times for the current
condition of your vehicle. Optimized
shifting will be restored as the vehicle
continues to be driven for a while.
.
When driving a vehicle that is
equipped with CVT under continuous
heavy load conditions such as towing a
camper or climbing a long, steep hill,
the engine speed or the vehicle speed
may automatically be reduced. This is
not a malfunction. This phenomenon
results from the engine control func-
tion maintaining the cooling perfor-
mance of the vehicle. The engine and
vehicle speed will return to a normal
speed when the engine is able to
maintain the optimum cooling perfor-
mance after the heavy load decreases.
Driving under a heavy load must be
performed with extreme care. Do not
try to pass a vehicle in front when
driving on an uphill slope while towing.
.
The continuously variable transmis-
sion is a chain type system that
provides superior transmission effi-
ciency for maximum fuel economy. At
times, depending on varying driving
conditions, a chain operating sound
may be heard that is characteristic of
this type of system.
&
Select lever
: With the brake pedal depressed, shift
while pressing the button in
: Shift while pressing the button in
: Shift without pressing the button
The select lever has four positions,
“
P
”
,
“
R
”
,
“
N
”
,
“
D
”
and also has a manual gate
for using the manual mode.
!
P (Park)
This position is for parking the vehicle and
starting the engine.
In this position, the transmission is me-
chanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, first apply the
parking brake, then shift into the
“
P
”
position. Do not hold the vehicle with only
the transmission.
To shift the select lever from the
“
P
”
to any
other position, you should depress the
brake pedal fully then move the select
lever. This prevents the vehicle from
lurching when it is started.
NOTE
To protect the engine while the
“
P
”
position is selected, the engine is
controlled such that the engine speed
may not become too high even if the
accelerator pedal is depressed hard.
!
R (Reverse)
This position is for backing the vehicle.
To shift from the
“
N
”
to
“
R
”
position, stop
the vehicle completely then move the
lever to the
“
R
”
position.
!
N (Neutral)
This position is for restarting a stalled
engine.
In this position the wheels and transmis-
sion are not locked. In this position, the
Starting and operating
7-19
–
CONTINUED
–
7