Subaru LEGACY Скачать руководство пользователя страница 202

Страница: 202 / 454

Black plate (207,1)

北

米

Model "A2470BE-A" EDITED: 2010/ 3/ 24

PTY (Program type) group selection

In PTY selection mode, press the

“

PTY

”

button

“ ”

to change the PTY

group by one step at a time.
Pressing

“ ”

changes the PTY group up

by one step. Pressing

“ ”

changes the

PTY group down by one step.
This operation only changes the display. It
does not change the station that is
currently being received.

Seek in PTY (Program type) group

In the PTY selection mode, when the
desired PTY group has been selected,
pressing the

“

SEEK

”

button

“

”

“

”

seeks within that PTY group. In this case,

“

PTY SEEK

”

is displayed on the screen.

Pressing

“

”

seeks up. Pressing

“

”

seeks down.
The control function returns to the normal
mode after approximately 10 seconds.

RDS text display

If the PS (Program Service Name) and/or
RT (Radio Text) are available, pressing
the

“

TEXT

”

button changes the display

among PS, RT and frequency. The initial
setting is

“

”

NOTE

The maximum number of characters

that can be displayed for PS is 8.

The maximum number of characters

that can be displayed for RT is 64.

If RT is 16 characters or longer,

press and hold the

“

TEXT

”

button for

0.5 second or longer in order to change
the page.

Audio

5-11

–

CONTINUED

–

Содержание LEGACY







































































































































































































































































































































































































































































Результаты поиска

Содержание LEGACY

Отзывы:

Похожие инструкции для LEGACY

Бренды по названию

Популярные бренды

Subaru LEGACY, Руководство пользователя

Результаты поиска

Содержание LEGACY

Отзывы:

Похожие инструкции для LEGACY

Бренды по названию

Популярные бренды