Subaru CROSSTREK HYBRID 2016, Руководство пользователя

Страница: 112 / 546

system have not been used for 2 weeks or
longer while all doors are locked
(1) 5 days after the push-button igni-
tion switch has been turned off, com-
munication between the antennas and
the access key will be stopped.
(2) 9 days after step 1, the sensors
(both the lock sensor and unlock
sensor) on the front passenger
’
s door
will be disabled.
To recover the keyless access func-
tion:
Operate one of the following items.
–
Unlock the doors by operating any
procedure other than gripping the front
passenger
’
s door handle
–
Lock the doors
–
Open a door and then close it
–
Turn the push-button ignition switch
to the
“
ON
”
position
.
Case 2 : When the access key has
been left in the operating range for 10
minutes or longer while all doors are
locked
To recover the keyless access func-
tion:
Operate one of the following items.
–
Unlock the doors by gripping the
door handle
–
Unlock the doors by pressing the
rear gate opener button
–
Lock the doors by touching the door
lock sensor
–
Lock or unlock the doors by using
the remote keyless entry system
–
Lock or unlock the doors by using
the power door locking switch
–
Open either of the front doors
!
Door unlock selection function
The door unlock selection function makes
the following operations possible.
.
Unlocking the driver
’
s door without
unlocking any other doors (including the
rear gate) when gripping the driver
’
s door
handle
.
Opening the rear gate without unlock-
ing any doors when pressing the rear gate
opener button
The operational/non-operational setting
for this function can be changed by a
SUBARU dealer.
Operational:
.
Only the driver
’
s door will be unlocked
when the driver
’
s door handle is gripped.
.
The rear gate will open, but the other
doors will remain locked when the rear
gate opener button is pressed.
Non-operational:
.
All doors and the rear gate will be
unlocked when the driver
’
s door handle is
gripped.
.
The rear gate will open and all doors
will be unlocked when the rear gate
opener button is pressed.
For the factory setting (default setting),
refer to
“
Function settings
” F
31.
For further details, consult a SUBARU
dealer.
NOTE
The setting can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details. Also, the setting can
be changed by operating the multi
function display. For details, refer to
“
Keyless access setting
” F
3-71.
&
Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
The setting can be changed by operat-
ing the multi function display. For de-
Keys and doors/Keyless access with push
–
button start system
–
CONTINUED
–
2-9