Subaru CROSSTREK HYBRID 2016, Руководство пользователя

Страница: 144 / 546

To change the setting:
1. Turn the ignition switch to the
“
OFF
”
or
“
ACC
”
position.
2. Press the trip knob to show
“ ”
or
“ ”
on the odometer and trip meter
display. The display can be switched as
shown in the following illustration by
pressing the trip knob.
*1: They cannot be displayed when the
ignition switch is in the
“
ON
”
position.
*2: Displayed only for models with BSD/
RCTA.
3. To change the current setting, press
the trip knob for at least 2 seconds.
: Activated
: Deactivated
NOTE
The initial illumination setting of the
meter/gauge needles of your vehicle
has been set for activation
“ ”
at the
time of shipment from the factory.
&
Speedometer
The speedometer shows the vehicle
speed.
&
Odometer
1) Trip knob
This meter displays the odometer when
the ignition switch is in the
“
ON
”
position.
The odometer shows the total distance
that the vehicle has been driven.
If you press the trip knob when the ignition
switch is in the
“
OFF
”
or
“
ACC
”
position,
the odometer/trip meter will light up. If you
do not press the trip knob within 10
seconds of illumination of the odometer/
trip meter, the odometer/trip meter will turn
off.
Instruments and controls/Meters and gauges
–
CONTINUED
–
3-7