Subaru Crosstrek 2022, Руководство пользователя

Страница: 212 / 475

Instruments and controls/Light control switch
the next time the ignition switch is
turned to the
“
LOCK
”
/
“
OFF
”
position
and the engine is restarted.
!
How to change the headlight mode
manually
Change to the low beam:
When you return the turn signal lever to
the center position, the high beam assist
function will turn off and the high beam
assist indicator light (green) will turn off.
Change to the high beam:
When you turn the light control switch to
the
“ ”
position, the headlight mode will
be changed to the high beam.
At this time, the high beam assist function
will turn off, the high beam assist indicator
(green) will turn off and the high beam
indicator light will turn on.
NOTE
.
After manually changing the head-
light mode to the high beam, if you turn
on the high beam assist function,
return the light control switch to the
“
AUTO
”
position.
.
When manually changing the head-
light mode to the high beam, if you turn
the light control switch to the
“ ”
position, the instrument panel illumina-
tion, parking lights, front side marker
lights, rear side marker lights, tail lights
and license plate lights will be on.
!
Tips for the high beam assist
system
.
The high beam assist function recog-
nizes the conditions surrounding the ve-
hicle based on the brightness of illumina-
tion ahead of your vehicle, etc. Therefore,
the headlight mode may switch in some
situations that do not match to the driver
’
s
sense.
.
A bicycle or cargo cycle may not be
detected.
.
Under the following situations, the
brightness of ambient illumination may
not be detected correctly and the high
beam assist function may not work prop-
erly. As a result, the glare of the high beam
may disturb the oncoming vehicle or
vehicle ahead. Also, the low beam mode
may continue although there are no
oncoming vehicles and vehicles ahead.
In the such cases, change the headlight
mode manually.
–
In bad weather (fog, snow, sand
storm, heavy rain, etc.)
–
When the windshield glass is dirty
or fogged
–
When the windshield is cracked or
damaged
–
When the stereo camera is de-
formed or the stereo camera lenses
are dirty
–
If there are lights similar to the
headlights or the tail lights in the
surrounding area
–
When an oncoming vehicle or ve-
hicle ahead is driven without its head-
lights and tail lights on
–
If the headlights of an oncoming
vehicle or the tail lights of a vehicle
ahead are dirty or discolored, or if the
light beams are not aimed correctly
–
When a rapid change of brightness
continues while driving
–
When driving on a road with many
ups and downs or uneven surfaces
–
When driving on a road with many
curves
–
When there are some objects that
reflect light strongly, such as a road
sign or a mirror in vehicle ahead
–
When the rear part of the vehicle
ahead, such as a container, reflects
light strongly
–
When the headlights of your vehicle
are damaged or dirty
–
When your vehicle is tilted, such as
in case the vehicle has a flat tire or is
being towed
–
Immediately after the engine has
started
.
In the following conditions, the head-
light mode will not be automatically chan-
3-70