Subaru Crosstrek 2022, Руководство пользователя

Страница: 226 / 475

Instruments and controls/Mirrors
7. Return to the vehicle and firmly press,
hold for two seconds and release the
HomeLink button up to three times. At this
point programming is complete and your
d e v i c e s h o u l d o p e r a t e w h e n t h e
HomeLink button is pressed and released.
1) Status Indicators
8. If status indicator arrows appear next
to the indicator light, please refer to
“
Garage Door Two-Way Communication
”
F
3-85.
In the event that there are still program-
ming difficulties or questions, additional
HomeLink information and programming
videos can be found at
www.HomeLink.com and
www.youtube.com/HomeLinkGentex. For
Genie and Sommer garage door openers
please go directly to the HomeLink web-
site.
!
Gate Operator / Canadian Pro-
gramming
Canadian radio-frequency laws require
transmitter remote signals to
“
time-out
”
(or quit) after several seconds of transmis-
sion, which may not be long enough for
HomeLink to pick up the signal during
programming. Similar to this Canadian
law, some U.S. gate operators are de-
signed to
“
time-out
”
in the same manner.
The indicator LED on the hand-held
remote will go off when the device times
out, indicating that it has finished transmit-
ting.
If you live in Canada or you are having
difficulties programming a gate operator or
garage door opener by using the program-
ming procedures, replace
“
Programming a
New HomeLink Button
”
step 3 with the
following:
While the HomeLink indicator light is
flashing orange, press and release (
“
cy-
cle
”
) your device
’
s hand-held remote
every two seconds until the HomeLink
indicator light changes from orange to
green. You may now release the hand-
held remote button.
3-84