Subaru Crosstrek 2022, Руководство пользователя

Страница: 319 / 475

–
When there is a difference in height
between your lane and the neighbor-
ing lane
–
Immediately after the BSD/RCTA is
activated by pressing the BSD/RCTA
OFF switch
–
Immediately after the shift lever/
select lever is shifted to the
“
R
”
position
–
When extremely heavy cargo is
loaded in the trunk or cargo area
.
During reversing, operation of the BSD/
RCTA approach indicator light and the
warning buzzer may be delayed or the
system may fail to issue these warnings
under the following conditions.
–
When backing out of an angled
parking space
–
When a large-sized vehicle is
parked next to your vehicle (That
vehicle prevents the propagation of
radar waves.)
–
When reversing on sloped roads
–
When reversing at a high speed
.
The BSD/RCTA approach indicator
light may illuminate when driving close to
solid objects on the road or road side
(such as guardrails, tunnels and side-
walls).
.
The BSD/RCTA approach indicator
light may flash when turning at an inter-
section in urban areas or a multilane
intersection.
.
The BSD/RCTA approach indicator
light may flash and the warning buzzer
may sound if a building or a wall exists in
the reversing direction.
.
In the following cases, the system may
detect a vehicle driving two lanes away
from your vehicle.
–
When you are driving on the near
side of its lane from the corresponding
vehicle
–
When the vehicle driving two lanes
away is driving on the near side of its
lane from your vehicle
&
BSD/RCTA warning indicator
!
System temporary stop indicator
System temporary stop indicator
This indicator appears when the system is
used under the following conditions.
.
Extremely high or low temperatures
.
When abnormal voltage exists for the
vehicle battery
.
When the radar sensor is significantly
misaligned
Once the above conditions are corrected,
the system will recover from the temporary
stop condition and the indicator will
Starting and operating/BSD/RCTA
–
CONTINUED
–
7-53