Subaru Crosstrek 2022, Руководство пользователя

Страница: 177 / 475

&
Basic operation
Control switch
1) (Up)
2) /SET (enter)
3) (Down)
By operating
“ ”
or
“ ”
of the control
switch, the screens and selection items
can be switched. When the
“
/SET
”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the
“ ”
information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with
“ ”
on the display,
pull the
“
/SET
”
switch on the steering
wheel toward you.
NOTE
When the multi-function display (color
LCD) is set to the setting screen, the
combination meter display (color LCD)
cannot be controlled pressing on the
“ ”
,
“ ”
and
“
/SET
”
on the control
switch.
&
Welcome screen and Good-
bye screen
When the driver
’
s door is opened and
closed after unlocking the door, the
welcome screen will appear on the com-
bination meter display (color LCD) for
approximately 20 seconds.
When the ignition switch is turned to the
“
LOCK
”
/
“
OFF
”
position, the combination
meter display (color LCD) gradually turns
off (Good-bye screen).
NOTE
.
Once the welcome screen appears,
it takes a certain period of time to
display it again.
.
If the ignition switch is operated
after unlocking the driver
’
s door, the
welcome screen will not appear even
when the driver
’
s door is opened and
closed.
.
The welcome screen will disappear
when you lock the driver
’
s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
.
The welcome screen including the
multi-function display (color LCD) (if
equipped) and the audio/navigation
unit can be set to on or off. For details,
refer to
“
Welcome Screen
” F
3-42.
Instruments and controls/Combination meter display (color LCD)
–
CONTINUED
–
3-35