Subaru 2015 XV Crosstrek, Руководство пользователя

Страница: 462 / 572

9-24
In case of emergency/If your vehicle is involved in an accident
button start system is deactivated, press
the push-button ignition switch with the
brake pedal released. The status of the
push-button ignition switch then changes
to
“
ON
”
.
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
&
Starting hybrid system
1. Apply the parking brake.
2. Shift the select lever into the
“
P
”
position.
3. Depress the brake pedal.
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the push-button ignition switch turns
to the
“
ACC
”
or
“
ON
”
position.
5. After the push-button ignition switch
turns to the
“
ACC
”
or
“
ON
”
position, while
depressing the brake pedal, press the
push-button ignition switch.
NOTE
If the hybrid system does not start even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
If your vehicle is involved in
an accident
CAUTION
If your vehicle is involved in an
accident, be sure to inspect the
ground under the vehicle before
restarting the hybrid system. If you
find that fuel has leaked on the
ground, do not try to restart the
hybrid system. The fuel system has
been damaged and is in need of
repair. Immediately contact the near-
est automotive service facility. We
recommend that you consult your
SUBARU dealer.
Your vehicle has a fuel pump shut off
system. When the vehicle sustains an
impact in an accident, etc., the fuel pump
shut off system stops supplying the fuel in
order to minimize fuel leakage.
Perform the following procedures to re-
start the hybrid system after the system is
activated.