Subaru 2015 XV Crosstrek, Руководство пользователя

Страница: 461 / 572

Access key
–
if access key
does not operate properly
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from the area between the
access key and the push-button
ignition switch. They may interfere
with the communication between
the access key and the push-button
ignition switch.
If the locking/unlocking procedures, power
switch procedures or hybrid system start
procedures cannot be operated because
of strong radio signals in the surrounding
area or a low battery condition of the
access key, perform the following proce-
dure. When the battery of the access key
is discharged, replace it with a new one.
Refer to
“
Replacing access key battery
”
F
11-46.
&
Locking and unlocking
1) Release button
2) Mechanical key
While pressing the release button of the
access key, take out the mechanical key.
Lock or unlock the driver
’
s door with the
mechanical key in the procedure de-
scribed in
“
Locking and unlocking from
the outside
” F
2-5.
NOTE
After locking or unlocking, be sure to
attach the mechanical key into the
access key.
&
Switching power status
1. Apply the parking brake.
2. Shift the select lever into the
“
P
”
position.
3. Depress the brake pedal.
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the status of the push-button ignition
switch changes to either of the following.
.
When the keyless access with push-
button start system is deactivated:
“
ACC
”
.
Under other conditions:
“
ON
”
5. When the keyless access with push-
In case of emergency/Access key
–
if access key does not operate properly
9-23
–
CONTINUED
–