Subaru 2015 XV Crosstrek, Руководство пользователя

Страница: 116 / 572

2-12
Keys and doors/Keyless access with push
–
button start system
of the access key from being
pressed.
NOTE
.
The operational/non-operational
setting for the keyless access function
can be changed. For the setting proce-
dure, refer to
“
Disabling keyless ac-
cess function
” F
2-17. The setting can
also be changed by a SUBARU dealer.
For more details, contact a SUBARU
dealer.
.
For detailed information about the
operation method for the push-button
ignition switch while the keyless ac-
cess function is switched to the non-
operational mode, refer to
“
Access key
–
if access key does not operate
properly
” F
9-23.
.
The keyless access with push-but-
ton start system uses weak radio
waves. The status of the access key
and environmental conditions may in-
terfere with the communication be-
tween the access key and the vehicle
under the following conditions, and it
may not be possible to lock or unlock
the doors or start the hybrid system.
–
When operating near a facility
where strong radio waves are trans-
mitted, such as a broadcast station
and power transmission lines
–
When products that transmit
radio waves are used, such as an
access key or a remote transmitter
key of another vehicle
–
When the access key is placed
near wireless communication
equipment such as a cell phone
–
When the access key is placed
near a metallic object
–
When metallic accessories are
attached to the access key
–
When carrying the access key
with electronic appliances such as
a laptop computer
–
When the battery of the access
key is discharged
.
The access key is always commu-
nicating with the vehicle and is con-
tinuously using the battery. Although
the life of the battery varies depending
on the operating conditions, it is ap-
proximately 1 to 2 years. If the battery
becomes fully discharged, replace it
with a new one.
.
If an access key is lost, it is
recommended that the access key be
reregistered. For reregistration of an
access key, contact a SUBARU dealer.
.
For a spare access key, contact a
SUBARU dealer.
.
Up to 7 access keys can be regis-
tered for one vehicle.
.
Carefully store the key number plate
supplied with the access key. It is
necessary for vehicle repair.
.
Do not leave the access key in the
storage spaces inside the vehicle, such
as the door pocket, dashboard and the
corner of the cargo area. Vibrations
may damage the key or turn on the
switch, possibly resulting in a lockout.
.
After the 12 V auxiliary battery is
discharged or replaced, initialization of
the steering lock system may be re-
quired to start the hybrid system. In
this case, perform the following proce-
dure to initialize the steering lock.
(1) Turn the push-button ignition
switch to the
“
OFF
”
position. For
details, refer to
“
Switching power
status
” F
3-6.
(2) Open and close the driver
’
s
door.
(3) Wait for approximately 10 sec-
onds.
When the steering is locked, the initi-
alization is completed.
.
Do not leave the access key in the
following places.
–
On the instrument panel
–
On the floor
–
Inside the glove box