Subaru 2015 XV Crosstrek, Руководство пользователя

Страница: 413 / 572

face; since having Vehicle Dy-
namics Control is no guarantee
that full vehicle control will be
maintained at all times and under
all conditions, its activation
should be seen as a sign that
the speed of the vehicle should
be reduced considerably.
.
Whenever suspension compo-
nents, steering components, or
an axle are removed from a
vehicle, have an inspection of
that system performed by an
authorized SUBARU dealer.
.
The following precautions should
be observed in order to ensure
that the Vehicle Dynamics Con-
trol system is operating properly:
–
All four wheels should be
fitted with tires of the same
size, type, and brand. Further-
more, the amount of wear
should be the same for all
four tires.
–
Keep the tire pressure at the
proper level as shown on the
vehicle placard attached to
the driver
’
s side door pillar.
.
If non-matching tires are used,
the Vehicle Dynamics Control
system may not operate cor-
rectly.
.
The Vehicle Dynamics Control
system helps prevent unstable
vehicle motion such as skidding
using control of the brakes, en-
gine power and electric motor
power. Do not turn off the Vehicle
Dynamics Control system unless
it is absolutely necessary. If you
must turn off the Vehicle Dy-
namics Control system, drive
very carefully according to the
road surface conditions.
&
System features
In the event of wheelspin and/or skidding
on a slippery road surface and/or during
cornering and/or an evasive maneuver,
the Vehicle Dynamics Control system
adjusts the hybrid system
’
s output and
the wheels
’
respective braking forces to
help maintain traction and directional
control.
.
Traction Control Function
The traction control function is designed to
prevent spinning of the driving wheels on
slippery road surfaces, thereby helping to
maintain traction and directional control.
Activation of this function is shown by
steady illumination of the Vehicle Dy-
namics Control operation indicator light.
.
Skid Suppression Function
The skid suppression function is designed
to help maintain directional stability by
suppressing the wheels
’
tendency to slide
sideways during steering operations. Acti-
vation of this function is shown by flashing
of the Vehicle Dynamics Control operation
indicator light.
NOTE
.
The Vehicle Dynamics Control sys-
tem may be considered normal when
the following conditions occur.
–
Slight twitching of the brake
pedal is felt.
–
The vehicle or steering wheel
shakes to a small degree.
–
An operating sound from the
engine compartment is heard
briefly when starting the hybrid
system and when driving off after
starting the hybrid system.
–
The brake pedal seems to jolt
when driving off after starting the
hybrid system.
.
In the circumstances shown in the
following list, the vehicle may be less
stable than it feels to the driver. The
Vehicle Dynamics Control System may
therefore operate. Such operation does
Starting and operating/Vehicle Dynamics Control system
7-25
–
CONTINUED
–