Subaru 2014 Forester, Руководство пользователя

Страница: 350 / 546

lead to fuel spillage and a fire.
.
Immediately put fuel in the tank
whenever the low fuel warning
light illuminates. Engine misfires
as a result of an empty tank
could cause damage to the en-
gine.
State emission testing (U.S.
only)
WARNING
Testing of an All-Wheel Drive model
must NEVER be performed on a
single two-wheel dynamometer. At-
tempting to do so will result in
uncontrolled vehicle movement and
may cause an accident or injuries to
persons nearby.
CAUTION
.
At state inspection time, remem-
ber to tell your inspection or
service station in advance not to
place your SUBARU AWD vehicle
on a two-wheel dynamometer.
Otherwise, serious transmission
damage will result.
.
Resultant vehicle damage due to
improper testing is not covered
under the SUBARU Limited War-
ranty and is the responsibility of
the state inspection program or
its contractors or licensees.
California and a number of federal states
have Inspection/Maintenance programs to
inspect your vehicle
’
s emission control
system. If your vehicle does not pass this
test, some states may deny renewal of
your vehicle
’
s registration.
Your vehicle is equipped with a computer
that monitors the performance of the
engine
’
s emission control system. Certi-
fied emission inspectors will inspect the
On-Board Diagnostic (OBDII) system as
part of the state emission inspection
process. The OBDII system is designed
to detect engine and transmission pro-
blems that might cause the vehicle emis-
sions to exceed allowable limits. OBDII
inspections apply to all 1996 model year
and newer passenger cars and trucks.
Over 30 states plus the District of Colum-
bia have implemented emission inspec-
tion of the OBDII system.
.
The inspection of the OBDII system
consists of a visual operational check of
the
“
CHECK ENGINE
”
warning light/mal-
function indicator light (MIL) and an
examination of the OBDII system with an
electronic scan tool.
.
A vehicle passes the OBDII system
inspection if proper operation of the
“
CHECK ENGINE
”
warning light is ob-
served, there are no stored diagnostic
trouble codes, and the OBDII readiness
monitors are all complete.
Starting and operating/State emission testing (U.S. only)
7-7
–
CONTINUED
–