Subaru 2014 Forester, Руководство пользователя

Страница: 152 / 546

The CHECK ENGINE warning light may
stop blinking and illuminate steadily after
several driving trips. You should have your
vehicle checked by an authorized
SUBARU dealer immediately.
&
Coolant temperature
low indicator light/Cool-
ant temperature high
warning light
CAUTION
.
After turning the ignition switch
to the
“
ON
”
position, if this
indicator light/warning light be-
haves in any of the following
ways, the electrical system may
be malfunctioning. Contact your
SUBARU dealer immediately for
an inspection.
–
It remains blinking in RED.
–
It remains illuminated in RED
for more than 2 seconds.
–
It remains blinking in RED and
BLUE alternately.
.
While driving, if this indicator
light/warning light behaves in
any of the following ways, take
the specified appropriate mea-
sure listed below.
–
Blinking or illuminated in
RED:
Safely stop the vehicle as
soon as possible, and refer
to the emergency steps to
take in the case of engine
overheating. After that, have
the system checked by your
nearest SUBARU dealer. Refer
to
“
Engine overheating
” F
9-
12.
–
Blinking in RED and BLUE
alternately:
The electrical system may be
malfunctioning. Contact your
SUBARU dealer for an inspec-
tion.
This coolant temperature low indicator
light/coolant temperature high warning
light has the following three functions.
.
Illumination in BLUE indicates insuffi-
cient warming up of the engine
.
Blinking in RED indicates that the
engine is close to overheating
.
Illumination in RED indicates overheat-
ing condition of the engine
For a system check, this indicator light/
warning light illuminates in
RED for
approximately 2 seconds when the igni-
tion switch is turned to the
“
ON
”
position.
After that, this indicator light/warning light
changes to
BLUE and maintains illumina-
tion in BLUE . This BLUE illuminated light
turns off when the engine is warmed up
sufficiently.
If the engine coolant temperature in-
creases over the specified range, the
indicator light/warning light blinks in
RED . At this time, the engine is close to
overheating.
If the engine coolant temperature in-
creases further, the indicator light/warning
light illuminates in
RED continuously. At
this time, the engine may be overheating.
When the indicator light/warning light
blinks in
RED or illuminates in RED , safely
stop the vehicle as soon as possible, and
refer to the emergency steps to take in the
case of engine overheating. Refer to
“
Engine overheating
” F
9-12. After that,
have the system checked by your nearest
SUBARU dealer.
Also, if the indicator light/warning light
often blinks in
RED , the electrical system
may be malfunctioning. Contact your
SUBARU dealer for an inspection.
NOTE
If the engine is restarted after a certain
driving condition, this indicator light/
Instruments and controls/Warning and indicator lights
3-15
–
CONTINUED
–