Subaru 2014 Forester, Руководство пользователя

Страница: 256 / 546

.
The indicator light on the air inlet
selection button may flash in the
following cases. However, this does
not indicate a malfunction.
–
After the vehicle battery has been
disconnected and reconnected.
–
When the vehicle battery voltage
is low.
Defrosting
&
Type A and B
Select the
“ ”
or
“ ”
mode by turning the
airflow mode selection dial to defrost or to
dehumidify the windshield and front door
windows.
&
Type C
Select the
“ ”
mode by pressing the
defroster button, or select the
“ ”
mode
by turning the airflow mode selection dial
to defrost or to dehumidify the windshield
and front door windows.
&
Type D
Select the
“ ”
mode by pressing the
defroster button, or select the
“ ”
mode
by pressing the airflow mode selection
button to defrost or to dehumidify the
windshield and front door windows.
NOTE
.
When the
“ ”
or
“ ”
mode is
selected, the air conditioner compres-
sor operates automatically regardless
of the position of the air conditioner
button to defrost the windshield more
quickly. However the indicator on the
air conditioner button will not illumi-
nate. At the same time, the air inlet
selection is automatically set to the
outside air mode.
For type A climate control system, in
this state:
–
You cannot stop the air condi-
tioner compressor by pressing the
air conditioner button.
–
You cannot select the recircula-
tion mode by pressing the air inlet
selection button.
.
For type C and D climate control
system, after defrosting the windshield
by pressing the defroster button
“ ”
,
pressing the button again returns the
system to the setting that had been
selected before the defroster was acti-
vated.
Climate control/Defrosting
4-11