Subaru 2014 Forester, Руководство пользователя

Страница: 233 / 546

3-96
Instruments and controls/Wiper and washer
NOTE
The windshield washer fluid warning
light illuminates when the washer fluid
level in the tank has dropped to the
lower limit. If the warning light illumi-
nates, refill the tank with fluid. For the
refilling procedure, refer to
“
Wind-
shield washer fluid
” F
11-32.
&
Rear window wiper and
washer switch
:
Washer (accompanied by wiper op-
eration)
: Continuous
: Intermittent
: Off
:
Washer (accompanied by wiper op-
eration)
!
Rear wiper
To turn the rear wiper on, turn the knob
switch upward.
To turn the wiper off, return the knob
switch to the
“ ”
position.
With the switch turned to the
“ ”
posi-
tion, the rear wiper will operate intermit-
tently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the
“
R
”
position
(CVT models) or the shift lever to the
reverse position (MT models), the rear
wiper will switch to continuous operation.
When you move the select lever/shift lever
from the
“
R
”
(reverse) position to another
position, the rear wiper will return to
intermittent operation.
NOTE
.
Even if the rear wiper switch is in the
“ ”
position, while the shift lever/
select lever is in the
“
R
”
position with
the windshield wiper operating con-
tinuously, the rear wiper will operate
intermittently.
.
If a cargo carrier or other object that
disturbs rear wiper operation is at-
tached, the rear wipers may be da-
maged when they operate. In cases like
this, set the reverse gear interlocked
rear wiper to
“
non-operational
”
. For
more details, we recommend that you
contact a SUBARU dealer.
!
Washer
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the
“ ”
position. The washer
fluid sprays until you release the knob.