Page 9
2-6
#7040743 - Revision A - September, 2016
Electronic Control System
Built-In Wine Storage (BW) Series
Built-In Wine Storage (BW) Series
Adjusting Set-Points
To adjust set-points, press the WARMER or COLDER keys on the control panel in multiple key strokes until the
desired set-point is achieved (See Figure 2-6). One key stroke equals a one degree change. The set-point will be
displayed for three seconds after the last key stroke. After three seconds, the compartment temperature will be dis-
played. As the compartment temperature changes, the temperature displayed will change by no more than one
degree per minute.
NOTECor
: The temperature range in a wine storage compartment is 40°F to 65°F.
Figure 2-6. Adjust Set-Point - Press COLDER or WARMER Keys in Multiple Key Strokes
Lighting System ON/OFF
For the purpose of displaying a wine supply, it is possible to energize the lights 100% of the time, even when the
door is closed. To do so, press and release the LIGHTS key (See Figures 2-7). To switch back to normal lighting
operation, press and release the LIGHTS key again.
Temperature Alarm and Door Alarm ON/OFF
There is an audio/visual temperature and door alarm in the BW-30 unit that can be enabled to warn a customer of
temperatures problems or if the door was left open. To enable the alarm, press and release the ALARM key (See
Figure 2-8). If the alarm is enabled, then the alarm icon on the display is illuminated. To disable this feature, press
and release the ALARM key again, and the alarm icon is de-energized.
NOTE:
If the alarm is enabled and temperature problems or door ajar are experienced, the alarm icon flashes and
the alarm will beep. There are also provisions in a BW-30 unit to allow for the alarm feature to be tied into a home’s
security alarm system.
Figure 2-7. Switching Light System ON/OFF - Press LIGHTS Key
Figure 2-8. Switching Temperature/Door Alarm ON/OFF - Press ALARM Key, Alarm Appear when Activated
Adjusting lower compartment set-point “colder”