Suaoki BT02-Z6.0A-P1, Руководство пользователя

Страница: 7 / 41

4.6 Fault indicator (Fig. 2/Item G)
The fault indicator will flash (light up) in the following cases:
• If the voltage of the battery is less than 3.5 V or more than 15 V. The battery is either unsuitable
for charging or is defective. It is also possible that other battery errors or faults can mean that
the battery cannot be charged.
• If the terminal clamps are connected to the battery terminals with the wrong polarity. The
protection against swapped poles ensures that the battery and charger do not get damaged.
Remove the charger from the battery and start the charging process from the beginning again.
Caution! Protection against swapped poles is not available when the SUPPLY program is used.
• If there is a short-circuit between the two terminal clamps (the metal parts of the clamps come
into contact with each other). The protection against short-circuits ensures that the battery and
charger do not get damaged.
5. Charge Curve
6. Overload Cut-out
The charger has electronic protection against overloading, short-circuits and swapped poles
when the 12V STD, 12V AGM, 12V Winter and 12V M programs are used. One or more fine fuses
are also fitted.
7. Maintenance & Clean
• Ensure that your battery is always fitted securely.
• A perfect connection to the cable network of the electrical system must be ensured at all
times.
• Keep the battery clean and dry. Apply a thin coating of grease to the connection terminals
using an acid-free, acid-resistant grease (Vaseline).
• Check the level of the acid in batteries that are not maintenance-free versions approximately
every 4 weeks and top up with distilled water if necessary.
EN-5
Voltage
Current
STEP 0
Activate
Battery STEP 1
Devulca
-nization STEP 2
Repair STEP 3
Pulse
current
charge STEP 4
CC STEP 5
CV STEP 6
Floating
Charge STEP 7
Flat
charge STEP 8
Analysis
Battery STEP 9
Compensati
-on Charge Steps
＜ 0.1A
0.1A-
1.2A
0.1A-
0.4A
0.1A-
1.2A
1.0A-
1.3A
5.0A-
6.0A
2.0A-
5.8A
0.5A-
1.0A 0.5A-
1.2A
0.5A-
1.2A
＜
3.5V
＜
13.6V
3.5V-
5.2V
5.2V-
9.0V
9.0V-
10.5V
10.5V-
12.6V
12.6V-
13.8V
13.8V-
14.0V
14.0V-
14.5V
14.5V