7
G rounding Pin
(A)
(B)
(C)
(D)
G rounding m ethods
ADAPTER
Other Important Features
˙
To protect the heater, the fan will start turning 15 seconds before heater kicks on and
continue turning for 30 seconds after heater is shut down.
˙
If the tem perature inside of the electric fireplace insert becom es abnorm ally high, the
tem perature protection m echanism will turn on autom atically and the heater will be shut
down within 2~3 seconds (fan will continue running for approxim ately 15 seconds after
heater shuts off). The four indicator lights on the control panel will twinkle together and the
beeper will sound. After 30 m inutes, the beeper will stop but the four indicators will keep on
twinkling together. W hen the tem perature inside of m achine returns to norm al, the
tem perature protection switch will release autom atically and the four indicators will twinkle
on turns to rem ind the user the tem perature protection has been canceled.
˙
Dust the fireplace on a regular basis using a soft, lint-free cloth and a high-quality furniture
polish. Always avoid "dry dusting" the fireplace as dust can scratch the wood finish.
˙
Always use the sam e type of furniture polish when dusting the fireplace. Alternating
between different types of furniture polish can cause clouding of the wood finish.
˙
Avoid using soap/water to clean the fireplace. Soap can dam age the wood finish and water
can penetrate the wood causing dam age. Anytim e liquid com es into contact with the
fireplace, it should be dried im m ediately to avoid dam age to the wood.
˙
If possible, the fireplace should be placed in a location where it will not be exposed to direct
sunlight for long periods of tim e. Sunlight can cause dam age to wood finishes, so
m inim izing its exposure will lengthen the life of the fireplace.
˙
To avoid the risk of electrical shock, ALW AYS disconnect the power cord from the electrical
outlet before any internal m aintenance or replacem ent of parts is done.
˙
Use caution when opening the m etal cabinet of the electric fireplace insert during inspection
and m aintenance.
CARE AND MAINTENANCE
Grounding Instructions:
This heater is suitable for 120 volts. The cord has a plug as shown in FIG URE A.
An
adaptor (not included) as shown in FIG URE C can be used to connect three-blade
grounding-type plugs into two-slot receptacles. The green grounding plug extending from the
adaptor m ust be connected to a perm anent ground such as a properly grounded outlet box.
The adaptor should not be used if a three-slot grounded receptacle is available.
Cover of Grounded
outlet Box
Metal Screw
Ground Means
Grounding Pin
