4
PREPARATION
˙
Before beginning assem bly of product, m ake sure all parts are present. Com pare parts with
package contents list and hardware contents.
˙
E stim ated A ssem bly Tim e: 15 m inutes
˙
Tools Required for Assem bly (not included): Phillips screwdriver
˙
Extrem e caution is necessary when this fireplace is used by or near children or individuals with
restricted m obility.
˙
NEVER leave this fireplace unattended when in use.
˙
Always unplug this fireplace when not in use. Turn off all controls prior to rem oving the plug
from the power source.
˙
This fireplace is designed for indoor use only. NEVER use this device outdoors.
˙
Connect this fireplace only to properly grounded outlets.
˙
M ake sure plug is fully inserted into the electrical outlet to avoid fire caused by short circuit.
˙
Use caution and do not strike the glass on this fireplace.
˙
NEVER use this device in bathroom s, laundry areas, or sim ilar locations where it m ay com e
into contact with water.
˙
Avoid placing the power cord in high traffic areas where it could becom e dam aged or be a trip
hazard.
˙
DO NO T run the power cord under carpeting, furniture, or appliances.
˙
NEVER cover the power cord with throw rugs, runners, or sim ilar coverings.
˙
DO NO T operate this device with a dam aged power cord or plug.
˙
DO NO T operate this device if the cord becom es dam aged, after the units m alfunctions in any
way, has been dropped, or becom es dam aged in any m anner. If this happens, discard the unit
or return to an authorized service facility to inspection and/or repair.
˙
DO NO T insert or allow foreign objects to enter any ventilation or exhaust opening as this m ay
cause an electric shock, fire, or dam age to this fireplace.
˙
This fireplace utilizes sparks and arcing in its internal operation. NEVER use this device in
areas where gasoline, paint, or other flam m able liquids are used or stored.
˙
Always plug heaters directly into a wall outlet/receptacle; never use with an extension cord or
relocatable power tap (outlet power strip)
˙
This fireplace m ay be equipped with a warning m echanism such as an audible or visual alarm
to warn of overheating. If the alarm is activated. Im m ediately turn off and inspect the device for
anything that m ay have caused the alarm . DO NOT OPERATE THE DEVICE W ITH THE
ALARM ACTIVATED.
˙
NEVER burn wood or other m aterials of any kind in this fireplace.
˙
Always use a licensed electrician for any m aintenance to this device.
˙
Always use properly grounded, fused, and polarized outlets.
˙
Always use ground fault protection where required by local electrical code.
˙
Always disconnect the device from its power source before m oving the device or perform ing
any cleaning or m aintenance.
˙
To avoid dam age when transporting or storing this fireplace, always keep both the insert and
its power cord in a dry place and free from excessive vibration.
˙
DO NO T tangle power cord with cords of other appliances when in use.
˙
Use this fireplace O NLY as described in this m anual. Using this device in a m anner other than
recom m ended by the m anufacturer m ay cause fire, electric shock, injury to persons, and/or
dam age to property.
˙
The rem ote control requires 1 Lithium Coin Cell Battery (size CR2025).
DO NO T m ix old and new batteries.
DO NO T use rechargeable silver oxide cell batteries with rem ote control unit.
DO NO T m ix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel-Cadm ium ) batteries.
DO NO T dispose of batteries in fire, Im proper disposal m ay cause batteries to leak or explode.
