Studio Technologies 5401A, Руководство пользователя

Страница: 24 / 53

Issue 4, August 2021 Model 5401A User Guide
Page 24 Studio Technologies, Inc.
Model 5401A
DANTE LEADER CLOCK
Network Menu
Interfaces
There are twelve display-only fields that relate to the key parameters that are associated with the Dante and
management interfaces. For clarity they display in the form of a simple table.
by link-local will have a format of 169.254.x.x. An IP
address assigned to the Dante secondary interface by
link-local will have a format of 172.31.x.x. The Dante
primary and secondary IP addresses can also be indi-
vidually set to a manual (static or fixed) IP addresses
using the Dante Controller application.
If the network configuration is selected for switched
the Dante primary IP address will be associated with a
network connection made to either the Dante primary
or Dante secondary RJ45 jack on the Model 5401A’s
back panel. Link down will display if no connection
is present. The IP address for the Dante secondary
interface will show disabled as it is not being utilized
in this network mode. The management IP address
will be associated with a network connection made
to the management RJ45 jack on the Model 5401A’s
back panel.
If the network configuration is selected for Redundant
then the Dante primary IP address will be associated
IP Addresses: These three display-only fields will
show the current IP addresses associated with the
Model 5401A’s Dante primary, Dante secondary, and
management ports. The Dante primary and manage-
ment fields will show either Link Down or an IP ad-
dress. The Dante secondary field will show Disabled,
Link Down, or an IP address. Link down will display
if an Ethernet connection has not been made to the
appropriate RJ45 jack on the Model 5401A’s back
panel. Disabled will show if Dante redundancy has
not been enabled in the Dante Controller applica-
tion. The 32-bit IP v4 addresses will be displayed in
what’s known as dot-decimal notation (4 octets, each
separated by a dot).
How the IP addresses are assigned will depend on
the Model 5401A’s network configuration setting as
performed using the Dante Controller application.
Each IP address can be established automatically
using a DHCP server or the IPv4 link-local protocol.
An IP address assigned to the Dante primary interface