Studio Technologies 5401A, Руководство пользователя

Страница: 23 / 53

Model 5401A User Guide Issue 4, August 2021
Studio Technologies, Inc. Page 23
Model 5401A
DANTE LEADER CLOCK
In EBU applications the typical nominal level will be
–18 dBFS. Some applications may benefit from a sine
wave test tone that’s 12 dB less than the reference
level. This would equate to configuring an output to
–34 dBFS (SMPTE) or –32 dBFS (EBU). These would
typically be associated with a 1000 Hz tone.
The default tone levels were selected in a pattern that
could help identify a specific channel. Dante transmit-
ter (output) channel Tone 1 has a default level of –21
dBFS with the value of 1 being selected to reflect the
channel number. Each subsequent channel then re-
duces its level by 1 dB. So, for example, the second
channel, Tone 2, has a level of –22 dBFS. While these
level steps may not be readily discernible to human
ears most test equipment or metering could easily be
used to identify specific channels.
Submit: A Submit button is located at the bottom of
the Level (dBFS) column on the Tone Generator menu
webpage. To save any changes made to the level or
frequency fields requires that the Submit button be
pressed. Changes will be made immediately after
pressing the Submit button.