Studer Innotec SA
Xcom-485i
User manual
11
5.7
E
LEMENTS ON THE
S
TUDER SIDE OF THE MODULE
Figure 3: Front and isometric view of the Xcom-485i
Key
Description
(a)
Push button (Not used / reserved for future use)
(b)
Bicoloured signalisation LED (green/red)
The signalisation LED indicates different functions using colour and frequency of blinking.
It is explained in chapter 5.7.1.
(c)
Studer device communication connectors
These connectors allow the Xcom-485i to be connected with an Xtender system. This is
the Studer communication side of the device.
Do not connect any devices suited for standard Ethernet connection.
(d)
Switch for communication line ending
This switch activates or deactivates the communication bus termination. The termination
is by default activated (terminated). In Figure 3, the termination is activated. Place the
switch to the correct side: if there is only one cable connected on port c (com bus) put
the switch in T (terminated) position. If there are two cables connected on port c
(Xcom-485i connected to two other devices) place the switch in position O (open).
5.7.1
Signalisation LEDs
Bicolour LED
Meaning
Blinks
2x
repeatedly in
GREEN
The Xcom-485i is running without any error.
Blinks
1x
repeatedly in
ORANGE
The Xcom-485i is currently starting up.
