Studer Innotec SA
Xcom-485i
4
User manual
1.3.2
Disclaimer of liability
Installation, commissioning, use and maintenance of this device cannot be supervised by the
company Studer Innotec SA. For this reason, we do not accept any liability for damages, costs or
losses generated either by an installation that is not conforming to the prescriptions, by a defective
operation or by poor maintenance. The use of this device is under the responsibility of the end-user.
This device is neither designed nor guaranteed for the supply of life support applications or any
other critical application with potential risks for human beings or for the environment. We shall
assume no liability for patent infringement or other third-party rights involved in the use of this device.
1.3.3
Compatibility
Studer Innotec SA guarantees the compatibility of the software updates with the hardware for one
year, starting from the date of purchase. The updates are no longer guaranteed beyond this date
and a hardware upgrade may be required. Please contact your reseller for any additional
information on compatibility.
1.4
S
AFETY PRECAUTIONS
1.4.1
Generalities
Carefully read all safety instructions before proceeding with the installation and commissioning of
the device. Failure to follow these instructions might constitute a lethal physical danger but can
also damage the functionalities of the device. Therefore, this manual should always be kept close
to the device.
1.4.2
Warnings
•
Wherever the system is, the person in charge of installation and commissioning must know
the safety measures and the prescriptions in force in the country. Therefore, the whole
maintenance must be carried out by qualified personnel.
•
All components connected to this device must be conforming to the laws and regulations
in force. Persons without a written authorization from Studer Innotec SA are forbidden to do
any changes, modifications or repairs whatsoever. Regarding authorized modifications and
replacements, only genuine components shall be used.
•
This device is meant for indoor use only and must under no circumstances be exposed to
rain, snow or any other humid or dusty environment.
1.5
P
RODUCT RECYCLING
The Xcom-485i meets the European RoHS directive 2011/65/EU on
hazardous substances and does not contain the following
elements: lead, cadmium, mercury, hexavalent chromium, PBB
or PBDE.
To dispose of this product, please use the service for collection of
electrical waste and observe all obligations in force in the place
of purchase.
For any installation, the local and national norms and regulations in force must be
strictly followed.
