Studer Innotec SA
Xcom-485i
User manual
3
1
INTRODUCTION
This manual contains a complete description of Xcom-485i communication module. This device is
a bridge between the proprietary Studer communication bus on one side and RS-485 (isolated) on
the other side. The protocol used on the RS-485 side is Modbus RTU (see our website for more
information).
1.1
L
EGAL NOTICE
The use of Studer Innotec SA devices is the responsibility of the customer in all cases. Studer Innotec
SA reserves the right to make any modification to the product without prior notice.
1.2
C
ONVENTIONS
1.2.1
Symbols
This symbol indicates a risk of material damage.
This symbol indicates a procedure or function that is important for a safe and correct
use of the equipment. Failure to respect these instructions may lead to the
cancellation of the guarantee or to a non-compliant installation.
1.3
W
ARRANTY AND LIABILITY
During production and assembly, each Xcom-485i undergoes several controls and tests. These are
carried out in full respect of fixed procedures. Each Xcom-485i is given a serial number allowing a
perfect follow-up of the controls, in conformity with the specific data of every device. For this
reason, it is very important to never remove the descriptive sticker with the serial number. The
production, assembly and tests of each Xcom-485i are entirely carried out in our factory in Sion
(CH). The warranty of this product depends on the strict following of the instructions in this manual.
The warranty period for the Xcom-485i is 5 years as from the date of delivery ex-works.
1.3.1
Exclusion of warranty
No warranty will be applied for damages caused by handling, operation or actions that are not
described in this manual. Damages arisen from the following events are not covered by the
warranty:
•
Overvoltage on the device.
•
Liquid in the device or oxidation due to condensation.
•
Failures due to a fall or to a mechanical shock.
•
Modifications made without the explicit authorization of Studer Innotec SA.
•
Nuts or screws partially or insufficiently tightened during installation or maintenance.
•
Damages due to atmospheric overvoltage (lightning).
•
Damages due to transport or improper packaging.
•
Disappearance of original marking items.
