Stuart Turner Showermate 1.5 bar Single, Руководство по установке, Страница: 12 / 21

Supply Cord Replacement
The supply cord and internal wiring within the terminal box are routed and
secured to ensure compliance with the electrical standard EN60335-1. It is
essential that prior to any disturbance of this internal wiring, all cable routing
and securing details are carefully noted to ensure re-assembly to the same
factory pattern is always maintained.
If the supply cord is to be changed or is damaged, it must be replaced with a special
cord assembly available from Stuart Turner Ltd or one of their approved repairers.
On disassembly note the cord retention and routing system. Re-assemble to the same
pattern.
For information on cable connection consult the wiring diagram and cable gland fitting
instructions.
Cable Gland Fitting Instructions
- 12 -
FLOWSWITCH
REED (S2)
GREEN / YELLOW
BLUE
BROWN
L
LOAD N S2 S2 L
E
N
S1 S1
FLOWSWITCH
REED (S1)
MAIN WINDING
THERMOTRIP
CAPACITOR
START WINDING
BLU
E
BROWN
BLA
CK
RED
BLUE
BROWN
BLUE
BROWN
230 VAC/1PH/50Hz
SUPPLY
Twin Pumps
Fig. 16
Fig. 17
To enable correct assembly of the cable gland the 'O'-ring (Fig. 17 item 1) must be
placed over the cable before the clamping insert (Fig. 17 item 2) can be tightened.
Note: Cable diameter range:- 6.5 mm to 9.5 mm.