STS M2-H, Руководство оператора, Страница: 32 / 71

32
M2-H
Set-up and Installation of M2 in detail
Permanent mounting of the unit
The M2 is built on a sub frame with isolators (pucks) attached to the bottom. The unit can be fastened
down to a permanent surface like a concrete pad, pull type trailer, flat deck of a truck or inside of a truck
body. Securing the unit with adequate size and grade of fasteners is the sole responsibility of the customer
and not of Surface to Surface Inc.
When fastening down the unit, care should be used when drilling holes to avoid such unseen items, as
gussets, cross-members, wiring or other fixtures below the surface.
Adequate space or an opening will also have to be considered when mounting, for the removal of the
filter / shear cartridge for regular cleaning and inspection.
Portable use of the unit
If the M2-H is to be used as a portable unit, there is a lifting bale (Fig.12) connected to the sub frame
to support and balance the unit when lifting or moving. Properly approved and rated lifting apparatus
should be used at all times and lifting done by qualified personal only.
The M2-H should only be placed on solid, level ground with a clear working area around it.
CAUTION
LIFTING LUGS OR THE LIFTING POINT(S)
identified and labelled on the skid
structure must be used in order to
safely lift and transport the unit.
Fig.12
WARNING
REFER TO THE SAFETY
STATEMENTS IN THE
OEM SUPPLIED MANUALS
AND
THIS MANUAL
REGARDING THESE
OPERATIONS.