manualshive.com logo in svg

Stryker 6506, Руководство по эксплуатации

Поделиться
Скачать
Stryker 6506 Скачать руководство пользователя страница 85

www.stryker.com

6506-209-001 REV F

79

Warranty

Stryker EMS, a division of the Stryker Corporation, offers one warranty option in the United States:

Two (2) year parts, labor, and travel. Stryker EMS warrants to the original purchaser that its products should be free from
manufacturing non-conformances that affect product performance and customer satisfaction for a period of two (2)
years after date of delivery. Stryker’s obligation under this warranty is expressly limited to supplying replacement parts
and labor for, or replacing, at its option, any product that is, in the sole discretion of Stryker, found to be defective.
Expendable components, i.e. mattresses, restraints, IV poles, storage nets, storage pouches, oxygen straps, and other
soft goods, have a one (1) year limited warranty.

The Stryker

Power-PRO

XT is designed for a seven (7) year expected service life under normal use conditions, and with

appropriate periodic maintenance as described in the maintenance manual. Stryker warrants to the original purchaser
that the welds on the

Power-PRO

XT will be free from structural defects for the expected seven (7) year life of the

product as long as the original purchaser owns the product. Original purchasers will also obtain a three (3) year limited
parts warranty for the X-frame components of the

Power-PRO

cot and a three (3) year limited power train warranty

covering the motor pump assembly and hydraulic cylinder assembly. Stryker’s obligation under this three (3) year limited
warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any part that is, in
the sole discretion of Stryker, found to be defective.

SMRT

Power Warranties. Stryker EMS warrants the

SMRT

charger for a two (2) year duration. All

SMRT

Paks are

warranted to be free from manufacturing non-conformances that affect product performance and customer satisfaction
for a period of one (1) year.

Upon Stryker’s request, the purchaser shall return to Stryker’s factory any product or part (freight prepaid by Stryker) for
which an original purchaser makes a warranty claim.

Warranty exclusions and other conditions:

•

Any improper use or alteration or repair by unauthorized service providers in such a manner as in Stryker’s judgment
affects the product materially and adversely, shall void this warranty.

•

Any repair of Stryker products using parts not provided or authorized by Stryker shall void this warranty.

•

There are extenuating circumstances and events that may alter the performance of the products such as an
ambulance accident. In Stryker’s discretion, certain circumstances may allow for evaluation of the product post
ambulance accident which could allow for continued use of the product. If products recommended to be removed
from service are put back into service, Stryker will consider the product as being subject to unusual stress and
improperly maintained. Products which are subject to unusual stress and improper maintenance are not subject to
Stryker’s warranty as noted above. In addition, Stryker will not indemnify any customer for any third-party claims
related to injuries caused by products that have been involved in accidents.

•

This warranty is void if the label bearing the serial number of the product has been removed or defaced.

•

This warranty is void if the product is not purchased from an authorized Stryker dealer.

This statement constitutes Stryker EMS’s entire warranty with respect to the aforesaid equipment. Stryker makes no
other warranty or representation either expressed or implied, except as set forth herein. There is no warranty on
merchantability and there are no warranties of fitness for any particular purpose. In no event shall Stryker be liable
hereunder for incidental or consequential damages arising from or in any matter related to sales or use of such
equipment.

No employee or representative of Stryker is authorized to change this warranty in any way.

Warranty exclusion and damage limitations

The express warranty set forth herein is the only warranty applicable to the product.

Any and all other warranties ,

whether express or implied, including any implied warranty of merchantability or fitness for a particular purpose
are expressly excluded by Stryker.

In no event shall Stryker be liable for incidental or consequential damages.

Содержание 6506
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды