Stryker 6506 Скачать руководство пользователя страница 46

Страница: 46 / 87

6506-209-001 REV F

www.stryker.com

Operation

Applying or releasing a wheel lock

WARNING

•

Do not apply a wheel lock when a patient is on the product or when you move the product to avoid the risk of tipping.

•

Do not install or apply a wheel lock on a product with worn wheels that are less than 6 in. diameter.

•

Do not leave a patient or occupant unattended. Hold the product while a patient or occupant is on the product.

To apply a wheel lock, press down on the pedal until it stops and is resting against the surface of the wheel.

To release a wheel lock, press down on the top of the pedal with your foot or lift up on the pedal with your toe. The top of
the pedal will rest against the caster frame when you release the wheel lock.

Note:

Wheel locks help prevent the product from rolling while unattended. Wheel locks may not provide sufficient

resistance on all surfaces or under loads.

Applying or releasing the optional Steer-LOCK

To apply the Steer-LOCK:

From the cot foot end, press the red (lock) side of the foot pedal or from the cot head end, press down on either red
pedal.

Rotate the cot until at least one head end caster locks.

To release the Steer-LOCK:

•

From the cot foot end, press the green (unlock) side of the foot pedal or from the cot head end, lift up on either red
pedal at the head end.

Applying or releasing the optional kickstand for dialysis scale

Use the kickstand to weigh patients on a scale.

WARNING

•

Always use two people when using the kickstand.

•

Always center the patient weight on the cot before you use the kickstand.

•

Always apply the kickstand with your foot only.

•

Always lower the cot height before you apply the kickstand for increased stability.

•

Do not apply the kickstand during transport. Keep the kickstand in the retracted position.

•

Do not use the kickstand as a brake.

•

Do not apply the kickstand on a sloped surface.

Note:

The optional kickstand (6085-102-000) is not compatible with the optional base storage net (6500-160-000) .

To apply the kickstand:

Operator 1: Apply the kickstand with your foot.

Operator 2: Lift the foot end of the cot to actuate the kickstand.

Both operators: Make sure that the kickstand is in the forward locked position.

Содержание 6506
























































































Результаты поиска

Содержание 6506

Отзывы:

Бренды по названию

Популярные бренды

Stryker 6506, Руководство по эксплуатации

Результаты поиска

Содержание 6506

Отзывы:

Бренды по названию

Популярные бренды