Stryker 6506 Скачать руководство пользователя страница 47

Страница: 47 / 87

www.stryker.com

6506-209-001 REV F

Operation

Applying or releasing the optional kickstand for dialysis scale (Continued)

To release the kickstand, Operator 1 lifts the foot end of the cot until both wheels are off the floor. Operator 2 rolls the
cot forward to make sure that the kickstand retracts.

Securing the patient with the G-rated restraint straps

WARNING

•

Always use all restraint straps to secure the patient on the cot. An unrestrained patient may fall from the cot.

•

Do not attach restraint straps to the base tubes or cross tubes.

CAUTION

Do not entangle the restraint straps in the base frame when you raise or lower the cot.

Note:

Restraint straps are a Type BF applied part.

Secure restraint straps to the cot in the required attachment locations (

Figure 16 on page 42

). Restraint strap attachment

locations should provide strong anchorage and proper restraint position. Do not allow restraint straps to interfere with

Содержание 6506
























































































Результаты поиска

Содержание 6506

Отзывы:

Бренды по названию

Популярные бренды

Stryker 6506, Руководство по эксплуатации

Результаты поиска

Содержание 6506

Отзывы:

Бренды по названию

Популярные бренды