Stryker 4402-000-001, Руководство по обслуживанию

Страница: 10 / 42

3. Using a 1/8” hex wrench, remove the eight screws (F and G) that secure the column and drawer assembly to the top
cradle bracket (Figure 4).
F Fiig gu urre e 4 4 –– C Co ollu um mn n a an nd d d drra aw we err a asssse em mb bllyy
N No otte e -- Lower the unit to the lowest height to help minimize the column dropping.
4. Using a T15 Torx driver, remove the four screws that secure both columns to each valance bracket.
N No otte e -- The entire column and drawer assembly should now rest on top of the base cover.
5. Using a 1/8” hex wrench, remove the two screws (AL) (Figure 5) that secure each release handle to the top cradle
bracket. Save the handle and screws.
EN 8 4402-009-002 Rev AB.1