Stryker 4402-000-001, Руководство по обслуживанию

Страница: 16 / 42

3. Using a 3/8” drive ratchet and 5/16” hex driver, remove the bolt (N) and caster (K, L, M) (Figure 10) assembly from the
base weldment. Discard the caster assembly.
Torque item N
to 35 to 45 ft-lb
Torque item N
to 35 to 45 ft-lb
Torque item N
to 35 to 45 ft-lb
Torque item N
to 35 to 45 ft-lb
F Fiig gu urre e 1 10 0 –– B Ba asse e w we elld dm me en ntt
4. Reverse to install.
5. Verify proper operation before you return the product to service.
D Drra aw we err sslliid de e rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• T15 Torx driver
• T10 Torx driver
• 5/16” Wrench
P Prro occe ed du urre e::
1. Apply the brakes.
2. Pull open the drawer.
3. Using a T10 Torx driver and 5/16” wrench, remove the two screws that secures the drawer slide to the drawer. Save the
screws.
4. Using a T15 Torx driver, remove the screw (E) and washer (F) (Figure 11) that secure the drawer slide to the column.
Save the screw and washer.
EN 14 4402-009-002 Rev AB.1