Stryker 0702-002-620, Руководство по обслуживанию и установке

Страница: 132 / 232

Power Plug Module P/N 0702-014-019 Power Plug Module P/N 0702-014-019
4-25
1. Unplug the electrical connections from the
power plug module
(P/N 0702-014-019)
(T). The diagram below shows a rear view of how the wiring is connected with the
power plug module
(P/N 0702-014-019) (T) removed from the chassis.
1. Unplug the electrical connections from the
power plug module
(P/N 0702-014-019)
(T). The diagram below shows a rear view of how the wiring is connected with the
power plug module
(P/N 0702-014-019) (T) removed from the chassis.
2. Using a T9 torx wrench, remove both
button head socket cap screws
(P/N 004-639-
000) (T).
2. Using a T9 torx wrench, remove both
button head socket cap screws
(P/N 004-639-
000) (T).
3. Remove the
power plug module
(P/N 0702-014-019) (S) and set aside. 3. Remove the
power plug module
(P/N 0702-014-019) (S) and set aside.
Note
: If the
power plug module
(P/N 0702-014-019) (S) is reinstalled, the
proper electrical safety tests must be performed before placing docking station
back in service. Follow procedure
6.5 Testing
on page 6-20 to make sure the
proper testing requirements are met.