Stryker 0702-002-620, Руководство по обслуживанию и установке

Страница: 96 / 232

Rover Power Coupler Circuit Board Assembly P/N 0702-001-086
Note:
There are two cables labeled
power coupler PCBA
that connect to the circuit board
assembly. One is grey with a black connector, the other cable has one red and one black
wire going to a white connector. The two connectors are of different size and can only be
connected one way. Take note of the cable orientation when removing the circuit board
assembly.
1. Using a 3/16” allen wrench, remove the two
socket head cap screws
(P/N 0004-645-
000) (BT) that hold the
IR board bracket
(P/N 0702-001-326) (AY) to the rover chassis.
2. Disconnect the two cables labeled
power coupler PCBA
going to the
rover power
coupler PCBA
(P/N 0702-001-806) (BA).
3. Using a 7/64” allen wrench, remove the two
socket head cap screws
(P/N 0004-529-
000) (C) that hold the
rover power coupler PCBA
(P/N 0702-001-806) (BA) to the
IR
board bracket
(P/N 0702-001-326) (AY).
4. Remove the circuit board and set aside.
2-67