Stryker Medical Renaissance Series, Руководство по обслуживанию

Страница: 10 / 123

Service Information
9
STEER CASTER LINKAGE ADJUSTMENT
Tools Required:
Phillips Head Screwdriver 3/8” Open End Wrench 1/2” Open End Wrench
5/32” Allen Wrench
F
E
B
C
A
D
E
Adjustment Procedure:
1. Lift up and support base hood (see page 15).
2. Using a 5/32” Allen wrench and 3/8” open end wrench, remove items (D), (E) and (F).
3. Using a 1/2” open end wrench, loosen jam nut (C).
4. Tighten item (A) into item (B) for more lever engagement or away from item (B) for less engagement.
5. To reassemble linkage, reverse steps 2 and 3.
6. Check steering wheel engagement. When properly adjusted, the locking tab should clear the notch in
the steer caster when in the neutral position, and should fully engage when in steer.
7. After proper adjustment is determined, reinstall base hood.