Struers RotoForce-4, Инструкция по эксплуатации

Страница: 19 / 127

RotoForce-4
Instruction Manual
13
Set the mode switch on Lupo to STOP
o
position.
Remove Lupo from RotoForce.
Hold the Lupo lubricant bottle firmly and remove the top lid.
Empty the bottle, still mounted on Lupo, of any remaining
lubricant.
− Fill the bottle with mild, soapy water.
− Put Lupo back on the supporting arm.
− Set the mode switch on Lupo to START
s
.
−
Set the dosing control to max. dosing (step 10) and let the
water run through the nozzle for 2-3-min.
Repeat the above points but fill with tap water to rinse out
any soap residue.
Refill with lubricant and remount the top lid.
Changing Lubricant Type /
Refilling
IMPORTANT
Always avoid turning the socket cap while unscrewing the Lupo bottle, as the
turning movement may cause damage to the socket cap gasket.