Struers RotoForce-4, Инструкция по эксплуатации

Страница: 32 / 127

RotoForce-4
Instruction Manual
26
Quick Reference Card
Place the specimen holder or specimen mover plate under the
quick coupling.
Press and hold the release button on the column of RotoForce-
4, while guiding the pressure tap of the specimen holder or
specimen mover plate into the coupling.
Turn the specimen holder or specimen mover plate until the
three pins engage in the corresponding holes.
Release the button.
Press MENU
m
on the RotoForce-4 to reach the menu system.
Press SELECT
L
to toggle between SAMPLE HOLDER or
SINGLE SAMPLES.
Press FORCE
fO
or
fN
to adjust the force to the desired
value.
Press TIME
tO
or
tN
to adjust the time to the desired
value.
Unlock RotoForce-4 by moving the handle up to two dots.
Adjust the RotoForce-4 so that the specimens are running at
about 2 - 4 mm from the periphery of the preparation disc.
Lock RotoForce-4 in that position by moving the handle down.
Adjust time and force on the RotoForce-4.
Set RotoForce-4 to Auto.
Set Lupo to Auto if lubricant dosing is required.
Press START
s
on RotoPol.
Inserting a Specimen Holder/
Specimen Mover Plate
Setting Holder Type
Adjusting the Force
Adjusting the Preparation Time
Adjusting the Position of
RotoForce-4
Running the preparation