Struers RotoForce-4, Инструкция по эксплуатации

Страница: 29 / 127

RotoForce-4
Instruction Manual
23
5. Maintenance
Clean all accessible surfaces of the machine with a moist cloth.
Raise RotoForce-4 to its upper position.
Select SAMPLE HOLDER and press START
s
. The coupling
will move down without rotating. Clean the coupling with a
clean cloth. An acid-free oil is recommended for the lubrication
of the coupling to ensure easy movement.
Press STOP
o
to return the coupling into the cylinder.
Select SINGLE SAMPLES and press START
s
. The pressure
feet will move down. Clean the pressure feet with a clean
cloth. An acid-free oil is recommended for lubrication of the
pressure feet, to ensure easy movement.
Press STOP
o
to return the pressure feet into the cylinder.
To avoid clogging of the Lupo nozzle, you should clean the nozzle
once a week:
Set the mode switch on Lupo to STOP
o
position.
Remove Lupo from the supporting arm.
Hold the Lupo lubricant bottle firmly and remove the top lid.
Empty the bottle, still mounted on Lupo, of any remaining
lubricant.
− Fill the bottle with mild, soapy water.
− Put Lupo back on the supporting arm.
− Set the mode switch on Lupo to START
o
.
−
Set the dosing control to max. dosing (step 10) and let the
water run through the nozzle for 2-3-min.
−
Repeat the above points but fill with tap water to rinse
out any soap residue.
− Refill with lubricant and remount the top lid.
Daily
Weekly
RotoForce
Lupo