16
CASE DESIGN, CONT’D: NIGHT CURTAIN ACCESS AND OPERATION
4. Night Curtain Access and Operation
The night curtain saves energy by preventing outside ambient air from
entering case. Use night curtain whenever possible.
A. Night curtain is attached to inside of case at underside of air return grille
and decks (at case front).
B. Night curtain handle (and retaining magnets) is to rest atop air return
grille (as shown). If not, remove decking; remove (2) screws holding
return air grille in place. Reach in, grasp handle and pull night curtain
upward. Replace grille. Reattach screws.
C. Firmly grasp handle and slowly extend night curtain (shown green for
illustrative purposes). Attach magnets to front of honeycomb housing.
D. Side view of night curtain attachment to honeycomb housing.
E. Dual access models only: Night curtains (optional) are on top of case, as
shown. Unwind and attach via magnets OUTSIDE acrylic air deflector.
>> Caution! To retract curtain, carefully break magnet’s hold on front of
honeycomb housing; slowly rewind curtain until it rests back on return air
grille. If allowed to ‘snap back’ to return air grille, it could be damaged!
Night Curtain Handle
(And Retaining Magnets)
Rest Atop Return Air Grille
Night Curtain Shown
Extended And Attached To
Front of Honeycomb Housing
(Via Magnets)
Air Return
Grille
Acrylic Air
Deflector
Decks
Night
Curtain
A
B
C
D
Night
Curtain
Honeycomb
Housing
LED
Lamp
Handle Magnets Honeycomb
E
