6
ASSEMBLY
Use the exploded drawing as your guide to assemble, Lay all parts and assemblies out in front of you
before beginning. The following procedure is recommended:
All numbers in parenthesis () refer to the index number from the parts breakdown.
1. Attached rail sections (13) to left and right posts and lower cross member (19) using bolts (9),
washers (10), lock washers (11) and nuts (12).
2. Put the press frame in an upright position, attach upper crossbeam (14) to left and right posts (5)
using bolts (1), washer (2), lock washer (3) and nuts (4). (Hook mounts should face down on upper
crossbeam.
