12
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly
with the product and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Inspect before each use. Do not use if bent, broken or cracked components are noted.
OPERATION
All numbers in parenthesis () refer to the index number from the parts breakdown.
1. Insert the bed frame pins to desired height, then lower the bed frame. Ensure bed frame is fully
rested on the bearing pins.
2. Place bolster plates (6) on press bed frame as needed.
3. Place work piece on the bed frame or pressing block, use every precaution necessary to ensure
safety and to prevent accidents. Position work piece in a manner which will not allow it to
inadvertently fall from the bed frame or pressing block.
4. With the notched (or stamped) end of jack handle (R22), close the release valve by turning it
clockwise until it is closed firmly tight.
