PART 1 • English
18
Symptom
Cause
Remedy
Incorrect values of some tuner
parameters
Set the values of the tuner
parameters correctly in the
installation menu.
Wrong direction of the dish
Check the signal strength
with a spectrum analyzer and
adjust your dish correctly.
Message “Antenna Power
Overload” displayed on TV
Receiver detected short cut in
your cable system
Disconnect receiver from main
power
Check your cable system.
remove short cut.Replace
LNB.
Restart receiver.
The remote control does not
work
The batteries of the remote
controller are not inserted or
exhausted
Check whether the batteries
are inserted correctly in your
remote control. Check the
batteries, and if exhausted
replace the batteries in the
remote control.
A.2 SPECIFICATIONS
1. Tuner and demodulator
Input frequency:
950 ~ 2150 MHz
Input impedance:
75
Ω
Input level:
-65 dBm ~ -25 dBm
LNB power supply:
13/18 V ±0.5 V, Max 500 mA, overload protected
Waveform:
QPSK
Symbol rate:
2 ~ 45 MS/s
Viterbi rate:
K=7,R=1/2, 2/3, 3/4, 5/6, 7/8, auto
Reed Solomon decode:
204, 188, T=8
2. MPEG Transport Stream & A/V Decoding
Video decoder
Standard:
ISO/IEC 13818-2 MPEG MP@ML
Video aspect ratio:
4:3, 16:9
Resolution:
720 x 576 (PAL), 720 x 480 (NTSC)
Video output level:
1.0 Vp_p, 75 Ohm
Audio decoder Standard:
ISO/IEC 11172 LAYER I&II
Output mode:
Stereo, Joint Stereo, Dual Mono, Mono
Sampling frequency:
32, 44.1, 48 kHz
Audio output:
0.775 Vrms, Unbalanced
Содержание SRT 60011
Страница 1: ...User Manual Digital Free To Air Satellite Receiver SRT 6004 6011 Picture similar...
Страница 2: ......
Страница 3: ......