PART 1 • English
5
English
2.0 YOUR RECEIVER
2.1 Front Panel
SRT 6004 see Fig.1
1. Mode indicator
The
RED
light indicates that the receiver is in STAND-BY mode. The
GREEN
light indicates that the
receiver is in AWAKE mode.
2. Power On/Off button
1
3. Channel Up/Down buttons
1
4 digits display
1
In STAND-BY mode this indicates current time
In AWAKE mode this indicates current channel number
1
Only for model SRT 6011
2.2 Rear Panel
SRT 6004 see Fig.1
1. SAT IN
Connect the digital signal from your LNB on the satellite dish to this connector.
2. SAT OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
3. TV SCART Connector
To connect your receiver to your TV set using a SCART cable.
4. Video RCA Connector
To connect your receiver to your TV set using RCA cable
5. Audio Left/Right RCA Connector
To connect your receiver to your TV set or amplifier using RCA cable
6. RS-232 Serial Port
This serial port can be used to connect your PC with your receiver, to download new
versions of software to your receiver.
7. Power Cord
Your receiver requires a current of 90~240V AC (Auto-selectable), 50~60Hz +/-5%. Make
sure to check the power specification before connecting your receiver to the wall outlet.
8. VCR SCART Connector
1
To connect your receiver to your video recorder using a scart cable. Your video signal will
now be looped through your receiver to your TV set.
9. S/PDIF Digital audio output
1
Use this coaxial output to connect your receiver to the input of your digital audio
amplifier.
10. Power ON/OFF Switch
1
1
Only for model SRT 6011
Содержание SRT 60011
Страница 1: ...User Manual Digital Free To Air Satellite Receiver SRT 6004 6011 Picture similar...
Страница 2: ......
Страница 3: ......