Strong SRT 60011, Руководство пользователя

Страница: 15 / 23

PART 1 • English
12
5.3.1 Preference
5.3.1.1 Language Setting
You can change the language of the OSD, preferred Audio and Subtitles.
Use
UP/DOWN to select the OSD language , Audio language or Subtitles language . Press OK or Right
to enter the language list and Press UP/DOWN to select the language. Press OK to confirm.
5.3.1.2 TV settings
You can set the TV mode, Screen mode and Video output.
n
TV mode
In TV mode Screen press OK or RIGHT to select mode, press OK to confirm. If you don’t
know which standard your TV has, please select AUTO .
n
Screen mode
In TV format Screen press OK or RIGHT to select 4:3 or 16:9 , press OK to confirm.
n
Video output
In Video output Screen press OK or RIGHT to select CVBS or RGB , press OK to confirm.
5.3.1.3 Time Settings
If a broadcaster provides GMT, you can set the time using GMT, or set your own time by yourself.
If the
GMT usage is ON then you have to set the Time Zone . If you set GMT Usage to OFF , Set Data
and Set Time item are displayed. To set the time value manually, move the cursor to the time item
and use the numeric buttons on the remote control.
5.3.1.4 Set Factory Default
Please be careful when using this function, because it will erase all the data and parameters you
may have set earlier to your receiver. Once you set the factory default you will have to re-install your
preferences and re-scan your channels. To reset your receiver to factory default, apply the following steps:
Select Set Factory default and press OK . Confirm warning message with OK and press the OK key,
the receiver will return to its factory default state, and all user data will be deleted.
NOTE : Your PIN code will change back to the factory setting “ 0000 ”.
5.3.2 OSD Style
In this menu, you can set the Menu Colour, Transparency Level and Border Pattern.
5.3.3 Parental Control
In this menu, you can set Channel Lock status ( ON or OFF ), the Menu Lock status, Parental Setting
and change the PIN code.
The default PIN code is
0000 .