Strobel VEB 200-1, Инструкции механика

Страница: 36 / 56

32
MA_VEB200-1-2_A2_181015_en
3.12
3.12.1
Setting the positions
The individual positions of the machine (machine positions) can be found in the
operating manual of the sewing machine.
General notes
N O T E !
For sewing machines that actually need only one position, both positions
always need to be programmed anyway for the control programming. This
is because the needle does have to be positioned somewhere following a
change in display in observance of the notes in chapter “3.11 Positions”.
The setting of the positions can be easily checked using the F-172 function.
Refer to chapter “3.13 Display of the needle positions”.
3.12.2
After entering the code number “1907” and button “E” for the technician level:
Setting the reference position
- Select parameter F-170. Display shows: .1.7.0.
- Press “E” button. Sr1_
- Press “>>” button. P0
I_I
Turn the handwheel in the machine's direction of rotation
until the circulation symbol disappears from the display.
Set the handwheel or needle to the sewing machine's
reference position (Refer to chapter “3.10 Cutting
position”).
- Press “E” button. .1.7.1.
- Exit the programming level by pressing the “P” button
or
continue with chapter “3.12.3 Setting positions 1 and 2” as of step 2.