Strobel VEB 200-1, Инструкции механика

Страница: 32 / 56

28
MA_VEB200-1-2_A2_181015_en
3.8.3 Replacing the knife (Fig. 14)
A t t e n t i o n !
Switch off machine electrically!
To replace cylinder head screw (2), unscrew it (hold shaft (14) with open-end
wrench 5 mm).
Caution: Do not hold onto the rotary knob (15) since the gearwheels can be
damaged!
The nose of knife (3) should sit in the shaft's groove to guarantee the right
position for the thread trimming.
Turn the main shaft manually and check the trimming position. (Fig. 15)
3.9
The correct sense of rotation of the hand wheel is clockwise.
Sense of rotation
The positions are properly set in the factory.
3.10
The machine should be positioned in such a way as the pedal is stepped back
that the distance between looper and blade in cutting position is approx. 1 mm.
For Strobel and EFKA controls, this corresponds to parameter 171, position
P2E.
Cutting position