- Secure the workpiece. Use a carpenter's clamp or vice to secure the workpiece to be worked on.
- Do not use any tools if you are under the influence of alcohol, drugs, medication or other narcotic or
addictive substances.
- The appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children must be
supervised to ensure that they do not play with the appliance.
4) POWER TOOL USE AND MAINTENANCE
- Always disconnect the power tool from the mains in the event of any work problems, before any cleaning
or maintenance, during each transfer and at the end of the operation! Never operate a power tool if it is
damaged in any way.
- If the tool starts to make an abnormal sound or smell, stop work immediately.
- Do not overload power tools. The power tool will work better and safer if you work it at the speed for which
it was designed. Use the correct tool for the job. A suitable tool will perform the work for which it was
manufactured well and safely.
- Do not use a power tool that cannot be safely switched on and off with the control switch. The use of such
tools is dangerous. A damaged circuit breaker must be repaired by a certified service center.
- Disconnect the tool from the mains before carrying out any adjustment, replacement or maintenance. This
measure will reduce the risk of accidental starting.
- Keep unused power tools out of the reach of children and unauthorized persons. Power tools used by
inexperienced users can be dangerous. Store power tools in a dry and safe place.
- Carefully keep the power tool in good condition. Regularly check the setting of moving parts and their
mobility. Inspect the protective covers or other parts for damage to the safe operation of the power tool. If
the tool is damaged, have it repaired before using it again. Many injuries are caused by improper
maintenance of the power tool.
- Keep cutting tools sharp and clean. Properly maintained and sharpened tools make work easier, reduce the
risk of injury, and work with them is better controlled. Use of accessories other than those specified in the
operating instructions or recommended by the importer may damage the tool and cause injury.
- Power tools, accessories, work tools, etc. use in accordance with these instructions and in the manner
prescribed for the particular power tool, taking into account the working conditions and the type of work
performed. Using the tool for purposes other than those for which it is intended can lead to dangerous
situations.
5) SERVICE
- Have a power tool serviced by a qualified repair person. Only the same spare parts may be used. This will
ensure that the safety of the power tool is maintained.
OPERATION
UNPACKING
- Carefully unpack the product and be careful not to throw away any part of the packaging material until you
have found all the parts of the product.
BEFORE PUTTING INTO OPERATION
- Read the following safety regulations and operating instructions before working with the well pump.
Familiarize yourself with all parts and proper use of the device. Failure to follow the warnings and instructions
may result in electric shock, fire, and / or serious injury. Keep this manual in a safe place for future reference.
If you pass the device on to others, pass it on together with the instructions.
- The appliance is not intended for use by persons (including children) whose physical, sensory or mental
incapacity or lack of experience and knowledge prevents them from being used safely, unless they have been
supervised or instructed in the use of the appliance by a person responsible for their safety. Take care of the
children to ensure that they cannot play with the product.
